These sensors may cause your car not to start

Car sensors are electronic devices Monitors various aspects of the vehicle and sends information to the driver or ECU (Electronic Control Unit). In some situations, the ECU automatically makes changes to specific components based on information received from sensors.

Current vehicles They have many sensors. Most of its various systems and all of them are very important to ensure proper functioning of vehicles.

However, when they fail, the car may not start. That’s why it’s so important when you notice certain things sensor in your vehicle If it fails, have a specialist mechanic check it out and fix it before your car becomes undriveable.

What sensors could be causing your car to not start?

There are many sensors that can cause your car not to start. Here we tell you which ones.

1.- Crankshaft position sensor

The first sensor to check when your car won’t start is the crankshaft position sensor (CPS). This sensor is used to monitor the angle or position of the crankshaft so that the ECM can initiate the ignition for proper combustion.

If you have a bad crankshaft sensor, your car may not start. The crankshaft sensor is responsible for determining RPM, piston position and then sending a signal to the ECM.

If the sensor fails completely, the ECM can’t read the correct data to start the ignition, at which point your car won’t start, or sometimes it starts and shuts off immediately.

2.- Camshaft position sensor

Among the car sensors, apart from the crankshaft sensor, the Camshaft Position Sensor (CPS) plays the most important and indispensable role in the car. The purpose of this sensor is to measure the rotations and position of the camshaft.

The ECM uses this data to know when to command spark and fuel for optimal engine performance. Camshaft and crankshaft position sensors help the ECM calculate optimal fuel injection and ignition timing for the engine.

3.-Accelerator position sensor

When the TPS is bad, the computer can read a flat signal from the sensor. As soon as you put your foot on the accelerator the throttle body opens but the fuel injection rate is low when the sensor reads flat. This changes the air-fuel ratio and your engine will slow down or stop immediately.

4.- Air mass flow

One of the sensors that can cause your vehicle to not start is the mass air flow sensor. A popular symptom of bad MAF sensors is a car that won’t start.

If the MAP sensor incorrectly reads low air, the ECM will order low fuel, at which point your combustion chamber will not have enough fuel and air to fire the spark plugs, and your vehicle will not start. to begin.

5.- Fuel pressure sensor

If your car is having trouble starting or isn’t getting the power it needs, the fuel pressure sensor could be bad. In short, its main function is to detect the pressure in the fuel system and optimize the fuel level.

So if the fuel pressure sensor isn’t working, your car won’t have enough fuel and won’t start.

***

This may interest you:

How the Engine Control Module Works in Your Car
How many sensors are there in a car?
How to Diagnose a Bad Speed ​​Sensor
What is a car camshaft sensor and what are the signs that it needs to be replaced?